Mini-Electronic

»small and light-weight hot air welding gun.«

Produktbeschreibung

Due to its light weight and handiness, the insulated welding gun MINI-electronic is perfectly suited for plastics fitters and tank manufacturers.

The heat output of 1500 W 230 V is infinitely variable between 20 and 700 °C and is kept constant by an electronic control system. In addition, it is possible to adjust the required air flow by means of an additional rotary knob.4

The device requires an external air supply, such as a side channel blower, fan or compressor. We additionally offer a mobile hand-held fan that is easy to carry and supplies the required air on construction sites and in the field.

If necessary, it is possible to equip the welding gun with a threaded slip-on nozzle M 10. This slip-on nozzle permits the use of screw-on quick-weld nozzles, which are preferably used in plastics and tank construction due to their high degree of stability.

The welding gun MINI-electronic can be equipped with numerous accessories for welding plastic plates, pipes, components and tanks.

At construction sites and for use in the field, the additionally available hand-held fan supplies the required air flow.

Technische Daten

Model	MINI-ELECTRONIC
Voltage	1500 W 230 V 50/60 Hz or 1300 W 120 V 50/60 Hz
Temperature	20-700 °C, infinitely variable
Air requirement	80 – 250 litres/min
Weight	0.395 kg + 3 m connection cable
Dimensions	Length 270 mm, handle diameter 54 mm
	Electrical safety: Double insulated

Item No. 4000
Round nozzle,
5 mm

Item No. 4001
Triple nozzle, round

Item No. 4002
Nozzle, 20 mm flat

Item No. 4003
Nozzle, 40 mm flat

Item No. 4004
Nozzle 40 mm flat, perforated

Item No. 4005
Shrink nozzle 15 mm, round

Item No. 4006
Shrink nozzle 20 x 5 mm

Item No. 4007
Adapter with thread M 10

Item No. 4008
Soldering nozzle 10 mm round

Item No. 5016
Shrink reflector

Item No. 5010
Speed welding nozzle
for nozzle item No. 4000,
3 mm round

Item No. 5011
Speed welding nozzle
for nozzle item No. 4000
4 mm, round

Item No. 5012
Speed welding nozzle
for nozzle item No. 4000
5 mm, round

Item No. 5013
Speed welding nozzle
for nozzle item No. 4000
5 mm, triangular

Item No. 5014
Speed welding nozzle
for nozzle item No. 4000
7.5 mm, triangular

Item No. 5015
Tacking tip for nozzle item No. 4000

Item No. 5004
Tacking tip for nozzle item No. 4007 (M10)

Item No. 5005
Speed welding nozzle
for nozzle item No. 4007 (M10)
3 mm round (M10)

Item No. 5006
Speed welding nozzle
for nozzle item No. 4007 (M10)
4 mm round (M10)

Item No. 5007
Speed welding nozzle
for nozzle item No. 4007 (M10)
5 mm round (M10)

Item No. 5008
Speed welding nozzle
for nozzle item No. 4007 (M10)
5 mm triangular (M10)

Item No. 5009
Speed welding nozzle
for nozzle item No. 4007 (M10)
7.5 mm triangular (M10)

Item No. 4011
Insulating tube

Item No. 2007
Heating element 1500 W, 230 V

Item No. 5021
Weld seam slide

Item No. 7000
Pressure roller two-armed,
45 mm

Item No. 6998
Pressure roller two-armed,
45 mm, ball bearing mounted

Item No. 7001
Pressure roller one-armed,
45 mm

Item No. 6997
Pressure roller one-armed,
45 mm, ball bearing mounted

Item No. 7002
Pressure roller two-armed,
80 mm

Item No. 6996
Pressure roller two-armed,
80 mm, ball bearing mounted

Item No. 6999
Tape guide for item No. 7000

Item No. 7005
Pressure roller 5 mm, for round wire

Item No. 7006
Pressure roller one-armed,
45 mm, 45° offset (patented)

Item No. 6995
Pressure roller one-armed,
45 mm, 45° offset (patented) ball bearing mounted