+ 49 (0)212 33 60 52Mail

Hand-held welding torches

FORSTHOFF Quick-L-Electronic

 

The latest generation of our easy to handle, lightweight and reliable hot air welding torch Quick-L-Electronic.

The hot air welding torch Quick-L-Electronic is characterised by a small handle that is both easy to grip and easy to use. Combined with a strong heat output of 1500 W 230V, the low-weight torch facilitates professional and fatigue-free welding.

In addition, the torch is equipped with a cold stage that can be switched on without changing the preselected heating stage.
The motor’s commutator carbons can be replaced several times, thus facilitating a continuous operation of the device. The carbons are easy to replace from the outside without having to open the device.
New! Our hand-held welding torches’ carbon brushes are equipped with a safety lock that prevents damage to the motor when the carbons are used up.

The air-cooled heating element pipe matches numerous different nozzle shapes.
The all-purpose device for welding any type of thermoplastic resin, technical textiles, tarpaulin materials, pond liners, roofing foils and foils used in swimming pool construction.

  • Can be used to repair truck tarpaulins and tents, to weld PVC floor coverings and linoleum
  • Processing of hard thermoplastic materials used in plastics and tank construction
  • For installation in machines and on conveyor belts
  • For use in repair shops to repair plastic parts in motorcars and motorbikes
  • For use in electromechanical work
ModelQUICK-L-ELECTRONIC
Voltage range230 V 50/60 Hz or 120 V 50/60 Hz
Heat output1500 W 230 V or 120 V
Temperature20–700 °C, infinitely variable
Weight1200 g with 3 m connection cable
DimensionsLength 320 mm, handle diameter 52 mm
Electrical safetyII/   Double insulated

 

 

Data sheet Quick-L-Electronic

Item No. 4000
Round nozzle, 5 mm

Item No. 4002
Nozzle, 20 mm flat

Item No. 4002
Nozzle, 20 mm flat

Item No. 4004
Nozzle 40 mm, flat, perforated

Item No. 4005
Shrink nozzle 15 mm, round

Item No. 4006
Shrink nozzle 20 x 5 mm

Item No. 4007
Adapter with thread M 10

Item No. 4008
Soldering nozzle 10 mm, round

Item No. 5016
Shrink reflector

Item No. 5010
Speed welding nozzle for nozzle item No. 4000, 3 mm round

Item No. 5011
Speed welding nozzle for nozzle item No. 4000, 4 mm round

Item No. 5012
Speed welding nozzle for nozzle item No. 4000, 5 mm round

Item No. 5013
Speed welding nozzle for nozzle item No. 4000, 5 mm triangular

Item No. 5014
Speed welding nozzle for nozzle item No. 4000, 7.5 mm triangular

Item No. 5000
Speed welding nozzle 
5,7 mm triangle, for nozzle 5 mm round

Item No. 5001
Speed welding nozzle 
7 mm triangle, for nozzle 5 mm round

Item No. 5002
Speed welding nozzle 
5,7 mm triangle, to screw-on, for adaptor M10

Item No. 5003
Speed welding nozzle 
7 mm triangle, to screw-on, for adaptor M10

Item No. 5017
Tacking tip hooked for adaptor M10

Item No. 5015
Tacking tip for nozzle item No. 4000

Item No. 5004
Tacking welding tip for nozzle item No. 4007 (M10)

Item No. 5005
Speed welding nozzle for nozzle item No. 4007 (M10), 3 mm round (M10)

Item No. 5006
Speed welding nozzle for nozzle item No. 4007 (M10), 4 mm round (M10)

Item No. 5007
Speed welding nozzle for nozzle item No. 4007 (M10),
5 mm round (M10)

Item No. 5008
Speed welding nozzle for nozzle item No. 4007 (M10),
5 mm triangular (M10)

Item No. 5009
Speed welding nozzle for nozzle item No. 4007 (M10),
7.5 mm triangular (M10)

Item No. 4011
Insulating tube

Item No. 2007 
Heating element 1500 W, 230 V

Item No. 5021
Weld seam slide

Item No. 7000 
Pressure roller, two-armed, 
45 mm

Item No. 6998 
Pressure roller two-armed, 
45 mm, ball bearing mounted

Item No. 7001
Pressure roller one-armed, 
45 mm

Item No. 6997
Pressure roller one-armed, 
45 mm, ball bearing mounted

Item No. 7002
Pressure roller two-armed, 
80 mm

Item No. 6996
Pressure roller two-armed, 
80 mm, ball bearing mounted

Item No. 7005
Pressure roller 5 mm, for round wire

Item No. 7006
Pressure roller one-armed, 
45 mm, 45° offset (patented)

AItem No. 6995
Pressure roller one-armed, 
45 mm, 45° offset (patented), ball bearing mounted

Item No. 7010
Quarter moon knife

Item No. 7011
Grooving tool

Item No. 7012
Metal case

  • Car upholsterers    
  • Tarpaulin manufacturers
  • Tent manufacturers    
  • Canvas covers
  • Manufacturers of advertising tarpaulins    
  • Roofing industry
  • Swimming pool construction    
  • Pond liner processing firms
  • Leisure and outdoor outfitters    
  • Sealing / waterproofing
  • Building trade    
  • Flooring construction and flooring materials
  • Automotive industry    
  • Manufacturers of signs and synthetic materials
  • Manufacturers of boilers and firing plants    
  • Motorcar and motorbike repair shops
  • Printing and label industry    
  • Electronics and electrical engineering industry
Go to top of page