+ 49 (0)212 33 60 52http://www.forsthoffwelding.com/goji-cream-original-cast/

Hand welding device

FORSTHOFF Oval-Q

Oval Q hand welding device

The new, handy and high-performance hand-held welding device from the FORSTHOFF Oval line. Practical and solid design combined with a slim handle ensures ergonomic and non-tiring work. The efficient hot-air welding device for welding all thermoplastics.

The Oval Q hot-air welding device is a universal device for welding all thermoplastics. The Oval line is distinguished by its slim, slightly oval-shaped handle. The air filters are easily cleaned by simply removing them from the handle.

Carbon brushes with a shut-off device make it possible to protect the collector and these can be changed several times. The double turbine system produces a strong air output of 280 litres/minute.

The Oval Q device has a heat output of 1,500 W 230 V or 1,650 W 120 V and has constant and absolutely reliable temperature electronics of up to 700 °C.

The air-cooled heating element tube is suitable for numerous differently shaped nozzles.

The universal welding device for welding all thermoplastics. Welding of technical textiles, tarpaulin and banner materials, pond foil liners, roofing foils, and foils used in the construction of swimming pools.

ModelOval-Q
Nominal voltage range120 V or 230 V~
Frequency range50Hz - 60Hz
Power 120 V 1650 W or 230 V 1500 W
Output temperature≤ 700°C
Noise emission level< 70dB
Protection classII /   (double insulation)
Weight1.4 kg with mains connection lead

 

 

Data sheet Oval-Q

Item No. 4000
Round nozzle, 5 mm

Item No. 4002
Nozzle, 20 mm flat

Item No. 4003
Nozzle, 40 mm flat

Item No. 4002.15
Nozzle 20 mm flat, 15° angled, for roofing

Item No. 4004
Nozzle 40 mm, flat, perforated

Item No. 4005
Shrink nozzle 15 mm, round

Item No. 4007
Adapter with thread M 10

Item No. 7014
Seam tester

Item No. 5016
Shrink reflector

Item No. 5010
Speed welding nozzle for nozzle item No. 4000,
3 mm round

Item No. 5011
Speed welding nozzle for nozzle item No. 4000,
4 mm round

Item No. 5012
Speed welding nozzle for nozzle item No. 4000,
5 mm round

Item No. 5013
Speed welding nozzle for nozzle item No. 4000,
5 mm triangular

Item No. 5014
Speed welding nozzle for nozzle item No. 4000,
7.5 mm triangular

Item No. 5000
Speed welding nozzle 
5,7 mm triangle, for nozzle 5 mm round

Item No. 5001
Speed welding nozzle 
7 mm triangle, for nozzle 5 mm round

Item No. 5002
Speed welding nozzle 
5,7 mm triangle, to screw-on, for adaptor M10

Item No. 5003
Speed welding nozzle 
7 mm triangle, to screw-on, for adaptor M10

Item No. 5017
Tacking tip hooked for adaptor M10

Item No. 5015
Tacking tip for nozzle item No. 4000

Item No. 5004
Tacking welding tip for nozzle item No. 4007 (M10)

Item No. 5005
Speed welding nozzle
for nozzle item No. 4007 (M10)
3 mm round (M10)

Item No. 5006
Speed welding nozzle
for nozzle item No. 4007 (M10)
4 mm round (M10)

Item No. 5007
Speed welding nozzle
For nozzle item No. 4007 (M10)
5 mm round (M10)

Item No. 5008
Speed welding nozzle
for nozzle item No. 4007 (M10)
5 mm triangular (M10)

Item No. 5009
Speed welding nozzle
for nozzle item No. 4007 (M10)
7.5 mm triangular (M10)

Item No. 4011
Insulating tube

Item No. 2007 
Heating element 1500 W, 230 V

Item No. 5021
Weld seam slide

Item No. 7000 
Pressure roller, two-armed, 
45 mm

Item No. 6998 
Pressure roller two-armed, 
45 mm, ball bearing mounted

Item No. 7001
Pressure roller one-armed, 
45 mm

Item No. 6997
Pressure roller one-armed, 
45 mm, ball bearing mounted

Item No. 7002
Pressure roller two-armed, 
80 mm

Item No. 6996
Pressure roller two-armed, 
80 mm, ball bearing mounted

Item No. 7005
Pressure roller 5 mm, for round wire

Item No. 7006
Pressure roller one-armed, 
45 mm, 45° offset (patented)

AItem No. 6995
Pressure roller one-armed, 
45 mm, 45° offset (patented), ball bearing mounted

Item No. 7010
Quarter moon knife

Item No. 7011
Grooving tool

Item No. 6994
Pressure roller 1-armed, 28mm bearing mounted

Item No. 7012
Metal case

  • For repairing automobile tarpaulins and tents, for sealing advertising banners, processing PVC floor coverings and linoleum.
  • For processing all thermoplastic hard materials in the construction of plastics and containers.
  • For shrinking packaging foils and mouldings
  • For separating and fusing synthetic threads and textiles
  • For sterilising packaging materials
  • For removing plastic flashes and shining plastic surfaces.
  • For use in electromechanical work
  • For shrinking shrink tubes, packaging foils
  • For heating for the purposes of deformation of thermoplastic semi-finished products.
                Go to top of page